Sábado, 02 Abril 2016 10:44

NUNCA ESTÁ DE MÁS, SABER ALGO MÁS... ¿CÓMO REPARAR UN PUNTO DÉBIL DE TU MUSCULATURA?

Escrito por
Valora este artículo
(0 votos)

Ya sabéis que todos  tenemos unos  músculos más desarrollados que otros, ante un  punto débil, que se resiste  al crecimiento, todos nos desesperamos al haberlo intentado todo para ponerlos al mismo nivel, sin ningún éxito. Pero siempre hay algo que hacer para recuperar un punto débil.

ESTRATEGIAS CLÁSICAS PARA RECUPERAR UN PUNTO DÉBIL

Hay músculos que responden mejor al entrenamiento y otros no lo hacen tanto, para equilibrar estos habrá que atacar los puntos débiles con total empeño, las estrategias clásicas de recuperación del musculo son:

1-      Entrenar prioritariamente el músculo retrasado al principio de cada entrenamiento porque ese es el momento que nos encontramos con más energía y mejor concentración.

2-      Hacer mas series de este músculo.

3-      Intentar aumentar la carga cada semana.

LOS AUTÉNTICOS Y LOS FALSOS PUNTOS DÉBILES

Los puntos débiles se clasifican en dos categorías: los “auténticos”  y los “falsos”.

1-      Un falso punto débil es un grupo de músculos que, efectivamente, esta menos desarrollado que el resto de la musculatura. La falta de entrenamiento, los entrenamientos acelerados o de manera irregular explican la falta de volumen. El caso más claro es el de la musculatura de muslos o pantorrillas, pero esto es relativamente fácil de poner al mismo nivel que los brazos por ejemplo.

2-      Un verdadero punto débil es un músculo que no crece aunque se trabaje con insistencia, estos son músculos a los que debemos de prestar atención verdaderamente.

 

¿A QUE SE DEBE UN PUNTO DÉBIL?

En teoría, los músculos deberían progresar a la misma velocidad, dado que las hormonas y los nutrientes cargados de anabolizantes se encuentran en igual proporción en cada uno de ellos. Pero la realidad demuestra que el crecimiento esta mas influenciado por alteraciones fisiológicas localizadas que por un anabolismo global.

LAS CAUSAS DEL MAL

Los puntos débiles tienen  un triple origen:

-          La genética.

-          El pasado deportivo de cada persona.

-          Las dificultades de recuperación muscular.

LA GENÉTICA

La genética influye en nuestra estructura de puntos débiles y puntos fuertes de cinco formas distintas.

LOS DE TREN SUPERIOR Y LOS DE TREN INFERIOR

A causa de factores genéticos, el cuerpo se divide en dos partes, hay personas con facilidad para desarrollar la musculatura de la parte superior y dificultades para desarrollar la parte inferior y viceversa. En difícil encontrar a alguien muscularmente armonioso por naturaleza. Incluso los que aparentan dicha musculatura igualada, tienen más facilidad en una parte que otra.

ASIMETRÍAS GENÉTICAS

No hay nadie simétrico, siempre hay músculos con mayor tendencia a desarrollarse en un lado que en otro. No hay que sorprenderse cuando veamos que tenemos un brazo más grande que el otro, en ocasiones es cosa de unos milímetros inapreciables, pero en otras ocasiones se trata de centímetros. Nuestros huesos tampoco son simétricos y siempre tenemos una clavícula más larga que la otra. Esta asimetría  altera todos los ejercicios del tren superior, particularmente a hombros, pectorales y espalda. Esto tiene una incidencia en la fuerza y el desarrollo  de los músculos.

MÚSCULOS CORTOS, MÚSCULOS LARGOS

La longitud de un musculo es uno de los factores para su capacidad de desarrollo, cuanto más largo es este musculo (es decir, se encuentran más alejados sus puntos de inserción), más fácil será hipertrofiarlo, por el contrario cuando es más corto es más difícil de desarrollar. Ese es el caso de los gemelos que cuelgan de la tibia, o de los bíceps que se acaban a “kilómetros” del antebrazo.

DENSIDAD FIBROSA Y DESARROLLO

Cuanto más rico es un musculo en fibras, más grande se hace, aun sin programas de musculación. Con entrenamiento, reaccionará mejor que un musculo poco denso en fibras, por suerte hay métodos para aumentar el número de fibras musculares. Se trata de:

-          Técnicas de entrenamiento como son las negativas acentuadas.

-          Complementos alimentario como la proteína whey, la leucina y la creatina, que utilizadas justo después del entrenamiento, tienen la capacidad de estimular la fabricación de nuevas células satélite a medida que se va entrenando, esas células se trasforman en fibras musculares.

DIFICULTAD DE CONGESTIÓN

Existe una relación directa entre la rapidez de crecimiento  de un musculo y su capacidad para congestionarse durante los entrenamientos. Cuanto más se hincha durante una serie más rápido será su crecimiento, por el contrario los músculos que no se llenan bien de sangre cuando se contraen siempre se retrasa más en su crecimiento, afortunadamente esto lo podemos mejorar haciendo series más largas.

EL PASADO DEPORTIVO DE CADA UNO

Una vez más tenemos el poder de influir en la genética. Es impresionante constatar que los músculos que han sido más solicitados en los deportes  y las actividades practicadas en la juventud se desarrollan más fácilmente en un programa de musculación, tener un pasado deportivo ayuda desarrollar una musculatura  con mayor rapidez.

LAS DIFICULTADES DE LA RECUPERACIÓN MUSCULAR

Los puntos débiles son en general músculos que se perciben poco, y en ese sentido es complicado trabajarlos y desarrollarlos, esto se explica por causa de tres fenómenos:

UNA FÉ CIEGA EN EL DOGMA

Los dogmas en el culturismo son recalcitrantes, particularmente en lo que respecta a la recuperación muscular. Por ejemplo, el press de banca es un ejercicio que solicita obligatoriamente los pectorales. Cuanto más peso tengamos que levantar estando acostados, mas crecerán los pectorales. Para los culturistas que tienen unos buenos pectorales estas dos reglas son perfectamente validas, pero este dogma de fe es también  el origen de la falta de pectorales en muchos otros.

En efecto, ¿Cuántos culturistas se toman la molestia de aprender a obligar a sus pectorales a invertir con máxima potencia posible en el press de banca? En general, lo único que ocurre es que se dedica a levantar todo el peso que puede creyendo que así sus pectorales se desarrollaran solos por la gracia de Dios.  Pero esto no es lo que ocurre siempre, y cuando vemos que el ejercicio no funciona y no crecen los pectorales, es inútil ensañarse, es ineficaz matarse levantando peso en el banco. Y este ejemplo del  press de banca es válido para otros como el squat para el cuádriceps, el remo para las dorsales, etc..  Que un ejercicio sea muy reputado para desarrollar pectorales o braquiales no significa que sirva invariablemente para todo el mundo ni para todos los músculos implicados.

LA COMPETICIÓN INTRAMUSCULAR

Existe una competición interna entre los músculos, en un ejercicio básico como el press de banca, que solicita hombros +  brazos + pectorales, los músculos que estén en mejor forma serán mas solicitados que el resto, y en consecuencia seguirán creciendo más rápido que los otros. Así que una persona que tenga muy buenos brazos, tirara más de ellos que de hombros y pectorales, y seguirá desarrollando aun mas brazos sin conseguir avanzar demasiado en los otros dos grupos musculares que se verán retrasados.

*Unos brazos muy potentes interfieren en el crecimiento de pectorales, hombros y espalda.

*Antebrazos muy desarrollados interfieren en el desarrollo de los bíceps.

*Pectorales importantes impiden el máximo desarrollo de los hombros.

*Unos buenos hombros impiden el desarrollo de los pectorales.

*Mucha musculación en la parte superior de la espalda impide el desarrollo de los dorsales.

*Glúteos prominentes interfieren en el desarrollo de los cuádriceps y los isquiotibiales.

LOS DEFECTOS DERIVADOS DE LA RECUPERACIÓN MUSCULAR

Cada repetición, cada serie, cada entrenamiento deja una traza no solo en los músculos sino también en el sistema nervioso. Estas trazas constituyen, una a una, nuestro sistema motor.

Si el press de banca desarrolla demasiado los hombros y poco los pectorales, cada vez que lo practiquemos el defectuoso programa de recuperación motriz se vicia más y más.  Así agravamos el problema en lugar de solucionarlo.

Visto 671515 veces Modificado por última vez en Sábado, 02 Abril 2016 10:54

24373 comentarios

  • Enlace al Comentario Фільми з українською озвучкою - https://rezka-ua.se/6126-svezhatinka.html Jueves, 23 Noviembre 2023 11:17 publicado por Фільми з українською озвучкою - https://rezka-ua.se/6126-svezhatinka.html

    Outstanding post but I was wondering if you could write a
    litte more on this topic? I'd be very grateful if you could elaborate a little
    bit further. Bless you!

    Reportar
  • Enlace al Comentario http://www.e-governance.ipt.pw/user/ryancolley/ Jueves, 23 Noviembre 2023 10:08 publicado por http://www.e-governance.ipt.pw/user/ryancolley/

    To keep them operating efficiently, an owner
    of these tools and toys should know about small engines: how they work and what to do when they don't.

    They also power our fun: outboard boats, snowmobiles, motorcycles, all-terrain vehicles,
    ultralight aircraft, and other toys. They power lawn mowers, tillers, cultivators, trimmers,
    edgers, snowblowers, chain saws, pumps, generators, air compressors, and other useful home tools.
    Spark arrestors are especially important on chain saws, motorcycles, and all-terrain vehicles operated in dry woodlands.
    No spark means no combustion, which means your engine doesn't run. A spark arrestor on the exhaust port can reduce
    the chances of such a fire. Then I made some
    relief cuts in the Crystal Light container and slid
    it over the can. Most services will provide free estimates over the
    phone or online so you can get an idea of how much it will cost to
    repair your machine before making a commitment. Most repairs or services can be done in an hour with a few basics by our experts.
    We pride ourselves on offering local and reliable services that
    cater to all your wine refrigeration needs. We’ll
    help you find reliable options for fast, quick, and easy local service.


    If you return home to find that your refrigerator has stopped working, you should first try unplugging it and plugging it
    back in. If the hinges are loose, try using slightly longer
    screws to attach them. If you don't match the screws to the metal plate,
    the metal will corrode. If this doesn't work, fasten the band or escutcheon with tiny metal
    screws, of the same metal as the hardware. Attach the escutcheons with adhesive or screws, matched metal to metal.
    To secure a loose band or escutcheon, squeeze adhesive caulking compound under the metal,
    and press it down to bond it to the wood. If the hinge
    leaves are damaged and the hinges cannot be replaced, glue the hinges into position with epoxy or a rubber- or silicone-base adhesive.
    For a more substantial repair, enlarge the hole, glue a piece of dowel into it,
    and drill a new screw hole.

    At Go Assist, our motto is 'repair, don't replace', saving you money and ensuring your
    oven lasts for as long as possible. Should your KitchenAid
    appliance require a repair, you can trust the expert technicians at Sears Home Services-the leading appliance repair service
    in the nation. Dryers are fairly simple home appliances, but
    it’s usually a good idea to have a trained technician come
    out to diagnose whatever problem your dryer is having.
    Refrigerator coils are insulated to avoid heat emission, so feeling heat means that the coils should
    be inspected by a technician. If looking for a ZISB42DCA side-by-side refrigerator or French-Door Refrigerator PFSS5NJWASS repair manual, or most other models, we will most
    likely have it for purchase. Everchill RV Refrigerator w/ Freezer -
    Reversible Doors - 10. Specifications of Way Interglobal Everchill BC-90 RV Refrigerator / Freezer - 110 Volt / AC Only - 3.

    Locations About .

    Our team are here to help and support you, every step
    of the way. A primer is used to help start a cold engine.

    Some fuel tanks are pressurized with air to help deliver fuel to the carburetor.
    Carburetor: The carburetor has one job: to mix the correct proportion of gasoline and
    air for the engine. When the screw holes are very much enlarged,
    adjust them by one of the methods detailed above.
    Above the waist it was semi-anthropomorphic; though its chest,
    where the dog’s rending paws still rested watchfully, had the leathery, reticulated hide of a crocodile or alligator.
    Other dryer repair suppliers may possibly only be after your dollars, but not us.
    The combination of oil and vinegar can also repair scuffs with ease.
    Both homeowners and business owners can rely on Mr.
    Appliance for appliance repair in Littleton, CO! Our Sparkle Appliance freezer repair service professionals
    in Denver can fix leading freezer brand names and models including
    Bosch, Dacor, Frigidaire, GE, Kenmore, Kitchenaid, LG, Maytag, Miele, Samsung,
    Sears, Sub Zero, Thermador, Viking, and Whirlpool.
    It can be much more if you need to reupholster the couch.

    Reportar
  • Enlace al Comentario Davidfet Jueves, 23 Noviembre 2023 07:46 publicado por Davidfet

    Широкопрофильная технология беспроводной связи, известная как Wi-Fi, стала неотъемлемой частью нашей повседневной жизни lan, но что такое Wi-Fi, и как можно осуществить его настройку?

    Reportar
  • Enlace al Comentario www.suits.ipt.pw Jueves, 23 Noviembre 2023 01:52 publicado por www.suits.ipt.pw

    You can judge the companies on the basis of their experience, brand and appliances expertise.
    Adrian is an ISCET licensed professional that has completed the National Appliance Service Technician Certification Exam and has the expertise to diagnose and repair any appliance.
    In this scenario, the heater and ejector assembly may need to be replaced which
    again is best handled by a trained technician and you should
    contact Frigidaire support for further assistance.

    Check to see if the fridge makes a solid vacuum when closed; if you
    notice the door can open easily and it seems to be letting in warm air,
    then the seal will need to be either repaired or replaced.
    A faulty door seal may be letting in too much hot air, which causes the condenser
    to work extra hard, which in turn causes the ice maker to
    freeze up. It's frustrating when you push your glass against the ice dispenser in your refrigerator door and nothing
    happens. As you can see, many of the causes of the ice maker not working are not catastrophic component
    failures but simple things like the door not being closed or the ice maker’s just
    freezing up and needing frosting. If there’s a rumble and no ice, it
    means there’s ice stuck in the chute in the door that needs to
    be cleared out.

    I’ve found that if ice melts and re-freezes due to infrequent use, recent power outages,
    or sudden swings in the refrigerator’s temperature, a jam can occur and
    cause problems. Then you can adjust the individual legs
    on each corner of the fridge to level it out correctly. In order for the ice maker
    to function properly the icemaker must be level. Use a spirit level to check how level the fridge is.
    The condenser coil uses the surface area to dissipate heat from
    the fridge, which allows it to cool; if this has built up dirt, it may be causing the fridge to get too hot.

    If you have a dishwasher that needs to be repaired or serviced in the
    San Diego Area contact us, and let us know what you need.

    The easiest way to clean out a water filter is to use a simple water and vinegar mixture and let
    the filter soak in it for 30 minutes.

    The easiest way to do this is to contact Frigidaire customer support, who will help arrange a replacement component and have someone come
    and fix it for you. If you have an Ice Machine, Ice Maker, Soft Serve
    Frozen Yogurt machine, Soft Serve Ice Cream machine, Reach-in Refrigerator or Freezer, Bottle Cooler,
    Ice Machine, Ice Merchandiser, Outdoor Refrigerator, Outdoor Ice
    Machine, Wine Refrigerator or Beverage Center which needs
    service, installation, Service or parts, you have come to the right place.
    Part of our advantage is that we stock all major parts related to these machines so there is usually no need to come for a second
    visit and get you running on the first call. Plastic items that are small
    enough will start to melt if they get trapped anywhere near
    the heating element, so check the element if you smell a bad odor while your dishwasher is
    running. Clean out the condenser coils using a brush or a rag, removing any built-up dust or hair,
    so the warm air has enough room to escape. Locate the water inlet valve
    and test it for continuity using a multimeter. In this scenario, you should completely clear the ice tray of ice by using a
    pitcher of warm water to loosen it.

    If your ice tray becomes clogged with frozen or misshapen ice cubes, it
    will likely not function well. So, just because the fridge is on, that doesn’t necessarily mean the ice maker
    is switched on. The component helps to cool the compressor and the condenser coils
    in the wine fridge cooling process.Due to its moving parts,
    it is one of the common components that can easily cause your wine cooler not to work since it can be blocked, bent, broken down, or clogged with debris.
    Despite the size of your wine cooler our experienced
    technicians have the experience and training needed to repair your wine cooler promptly and right the first time.

    Hence MA cool comforts technicians take immediate effort towards solving any problems associated with display freezers in Hyderabad.
    If the cause isn't obvious, count on the experts at Sears Home Services to take a closer look.
    The on-off switch may be located on the right side, behind
    a door, or with an additional power button. They use genuine VW replacement
    parts, stand behind their work, and are committed to
    seeing a problem through to the end, even if you have a difficult-to-diagnose issue.

    Reportar
  • Enlace al Comentario 카지노사이트 Jueves, 23 Noviembre 2023 00:56 publicado por 카지노사이트

    Good day! I know this is somewhat off topic but I was wondering which blog platform are you using for this website?
    I'm getting sick and tired of Wordpress because I've had issues with hackers and I'm looking at alternatives
    for another platform. I would be fantastic if you could point me in the direction of a good platform.

    Reportar
  • Enlace al Comentario 카지노사이트 Jueves, 23 Noviembre 2023 00:36 publicado por 카지노사이트

    Do you have a spam issue on this website; I also am a blogger,
    and I was wanting to know your situation; we have developed some nice practices and we are looking to swap solutions with other folks, please shoot me an e-mail
    if interested.

    Reportar
  • Enlace al Comentario สล็อตpg Jueves, 23 Noviembre 2023 00:31 publicado por สล็อตpg

    Thanks a bunch for sharing this with all of us you actually know what you are
    talking about! Bookmarked. Kindly also discuss with my web site =).

    We will have a link alternate contract between us

    Reportar
  • Enlace al Comentario RodneyKaT Miércoles, 22 Noviembre 2023 19:09 publicado por RodneyKaT

    Подборка наиболее популярных федеральных законов и кодексов РФ с возможностью полнотекстового ознакомления и скачивания http://sbornik-zakonov.ru/ Общий хронологический указатель к Полному собранию законов.

    Reportar
  • Enlace al Comentario GeorgeJutty Miércoles, 22 Noviembre 2023 17:49 publicado por GeorgeJutty

    Выпуская продукцию или услугу на рынок, компания неизменно сталкивается с подтверждением соответствия такой продукции http://www.certif-test.ru/kody-okp/ или услуги общепринятым стандартам, законодательным, договорным или иным требованиям.

    Reportar
  • Enlace al Comentario สล็อตออนไลน์ Miércoles, 22 Noviembre 2023 17:13 publicado por สล็อตออนไลน์

    You actually make it appear really easy together with your presentation but I to find
    this topic to be really something which I think I'd never understand.
    It kind of feels too complicated and very vast for me.
    I am looking forward to your subsequent put up, I'll attempt to get the grasp of it!

    Reportar

Deja un comentario

Asegúrate de llenar la información requerida marcada con (*). No está permitido el código HTML. Tu dirección de correo NO será publicada.